Skip to main content

Template: NERC Generator Frequency and Voltage Protective Relay Settings (PRC-024-2)

Preview of template's gridmo Flow showing Nodes

Version: 1

Last updated: 15 Nov 2024

Country:

US

Software required:

PSS®E
PSCAD™

Source: NERC | Generator Frequency and Voltage Protective Relay Settings (PRC-024-2) | Version 2 | 29 May 2015

How to download: Add a new Flow in gridmo and select this template from the list.

Quick start

Before running this template, complete the following:

  • Complete the Model setup template, including setting and testing all standard global variables for the PSS®E and PSCAD™ models of your generating system.
  • If your project is a battery (BESS), set up scenario variables for both discharging and charging mode.
  • Add this template to your project.

Changes required before first run​

  • None
  • None

Background​

The following sections detail the assumptions and notes that have been made in the development of this template.

Important

It is important to review the below assumptions and notes to ensure that the template is suitable for your project.

Currently, this template implements frequency ride-through requirements as per the requirements of the Eastern Interconnection only. Requirements for the ERCOT Interconnection can be found in the ERCOT dynamic Model Quality Test (MQT).

Sources​

Revision history​

Version 1 (v1.4.18) | 15 November 2024​

  • First template release